Filter
Top Products
31
(ENG) VQT3N40
Recording Mode:
Taking Pictures with Your Favorite Settings
(Program AE Mode)
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in [REC] menu.
Set the mode dial to [ ].
Note
•
The shutter speed is automatically set between about 20 seconds and 1/4000th of a second in
the following cases.
– When the [SENSITIVITY] is set to [ISO160].
– When the aperture value is set to F3.5 [when the interchangeable lens (H-FS014042) is
attached].
– When the aperture value is set to F4.0 [when the interchangeable lens (H-FS045200) is
attached].
In Program AE Mode, you can change the preset aperture value and shutter speed without
changing the exposure. This is called Program Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Program AE Mode.
1 Press the shutter button halfway and display the
aperture value and shutter speed value on the screen.
2 While the values are displayed (about 10 seconds),
perform the Program Shift by rotating the rear dial.
•
It will switch between Program Shift operation and Exposure
Compensation operation every time the rear dial is pressed while
the values are displayed.
• Rotate the rear dial to display the [EXPO.METER] B.
• The Program Shift indication A appears on the screen when Program Shift is activated.
• To cancel Program Shift, turn the camera off or rotate the rear dial until the Program Shift
indication disappears.
Program Shift
A B
DMC-G3K&G3W&G3PP-VQT3N40_eng.book 31 ページ ２０１１年４月２９日 金曜日 午後１２時１３分