105
4. Focus and Shutter (Drive Mode) Settings
By setting [Touch AF] (P314) in [Touch Settings] of the [Custom] menu to [AF+AE], you
can optimize the focus and brightness for the position you have touched.
1 Select the menu. (P54)
2 Select [Touch AF] and then touch [AF+AE].
3 Touch the subject you want to optimize the
brightness for.
•
AF area setting screen is displayed. (P101)
• The brightness optimization position is displayed on the
center of the AF area. The position follows the movement
of the AF area.
• [Metering Mode] is set to [ ], which is used exclusively
for the Touch AE.
• Touching [Reset] returns the brightness optimization position and the AF area to the
center.
4 Touch [Set].
•
The AF area with the same function as [Ø] is displayed on the touched position.
• Touching [ ] returns [Metering Mode] to the original setting and cancels the
brightness optimization position. The AF area setting is also canceled.
• Touching [ ] returns [Metering Mode] to the original setting and cancels the
brightness optimization position.
Optimizing the focus and brightness for a touched position
Applicable modes:
> [Custom] > [Touch Settings]
When the background has become too bright, etc., the
brightness contrast with the background can be
adjusted by compensating the exposure.
MENU
ュリヴヱハ
6HW5HVHW
AE