Filter
Top Products
261
10. Using the Wi-Fi/NFC Function
When using an SSID and password to set up a connection
1 Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.
2 Select the SSID displayed on the screen of the
camera.
3 Enter the password displayed on the screen of the
camera.
(Only when connecting for the first time)
4 Start “Image App”. (P258)
•
The connection method differs according to your smartphone/tablet.
If you are using an Android device
When scanning the QR code to set up a connection
1 Start “Image App”. (P258)
2 Select [QR code].
3 Using “Image App”, scan the QR code displayed
on the screen of the camera.
•
If you press [MENU/SET] on the camera, the QR
code will be enlarged. When it is difficult to scan
the QR code, try enlarging it.
When using an SSID and password to set up a connection
1 Start “Image App”. (P258)
2 Select [Wi-Fi].
3 Select the SSID displayed on the screen of the
camera.
4 Enter the password displayed on the screen of
the camera.
(Only when connecting for the first time)
•
If you mark the box that enables the smartphone to display the password, you
can see the password as you enter it.
Wi-Fi
0123456789ABC