Filter
Top Products
7
(ENG) VQT3T96
Care of the camera
Do not subject to strong vibration, shock, or pressure.
•
The lens, LCD monitor, or external case may be damaged if used in
below conditions. It may also malfunction or image may not be
recorded.
– If you drop or hit the camera.
– If you press hard on the lens or the LCD monitor.
This camera is not dust/splash/water proof.
Avoid using the camera in a location with a lot of dust,
water, sand, etc.
•
Liquid, sand and other foreign material may get into the space
around the lens, buttons, etc. Be particularly careful since it may
not just cause malfunctions, but it may become unrepairable.
– Do not use in places with a lot of sand or dust.
– Do not use in places where water can come into contact with this
unit such as when using it on a rainy day or on the beach.
Do not place your hands inside the mount of the digital
camera body. Since the sensor unit is a precision
apparatus, it may cause a malfunction or damage.
∫ About Condensation (When the lens or the LCD monitor
is fogged up)
•
Condensation occurs when the ambient temperature or humidity
changes. Be careful of condensation since it causes lens and LCD
monitor stains, fungus and camera malfunction.
• If condensation occurs, turn the camera off and leave it for about
2 hours. The fog will disappear naturally when the temperature of
the camera becomes close to the ambient temperature.
DMC-GX1X&GX1K&GX1PP-VQT3T96_eng.book 7 ページ ２０１１年１０月１３日 木曜日 午後２時５４分