Others
111
Card
• Do not leave the card in places where
there is high temperature or direct
sunlight, or where electromagnetic
waves or static electricity are easily
generated.
• Do not bend or drop the card. The
card or the recorded content may be
damaged.
• After use, be sure to remove the card
from the camera.
• Do not touch the terminals on the back
of the card with your fingers. Do not
allow dirt, dust or water to enter it.
ª LCD monitor
• In a place with drastic temperature
changes, condensation may form on
the LCD monitor. Wipe it with a soft,
dry cloth.
• If the camera is extremely cold when
you turn the camera on, the image on
the LCD monitor is slightly darker than
usual at first. However, as the internal
temperature increases, it goes back to
the normal brightness.
ª Folder Composition
When a Memory Card with data
recorded on it is inserted into a PC, the
folders shown below will appear.
• In the [100_PANA] folder it is possible
to record up to 999 pictures.
• In the [MISC] folder it is possible to
record the files that have been set with
DPOF settings.
• The files recorded in flip animation
function are stored in [PRIVATE1]
folder (DMC-LC80/DMC-LC70).
• The motion images created by flip
animation function are stored in
[100_PANA] or another folder
(DMC-LC80/DMC-LC70).
ª Printing pictures recorded with
HDTV mode
When you print pictures recorded after
setting the picture size to [HDTV]
(1920k1080 pixels), both ends of the
pictures may be cut out.
To print pictures with ends:
When you order photo studios to print
pictures:
• Ask the photo studio if the pictures can
be printed with both ends.
When you print pictures with your
printer:
• When using the printer with a trimming
feature or a feature which cuts out
both edges of the pictures, cancel the
feature for printing.
• The feature depends on the printer
used. Refer to the operating
instructions of the printer for details.
100_PANA
MISC
PRIVATE1
EXPORT
DCIM
SD Memory
Card
DMC-LC80.book 111 ページ 2004年6月15日 火曜日 午後5時49分