Filter
Top Products
Playback (advanced)
93
Formatting the Card
Preparation
• Set the mode dial to [ ]. (P29)
1 Select [FORMAT].
2 Select [YES] to format.
¬
Suggestions/Tips
¬
• Usually, it is not necessary to format
the card (initializing). Format the card
when the message [MEMORY CARD
ERROR] appears.
• If the card has been formatted by a PC
or other equipment, format the card on
the camera again.
• After formatting, recorded pictures and
any other data cannot be recovered.
• If the card is formatted all images
and data will be permanently
erased. They cannot be reclaimed.
If any important pictures are on the
card, please copy them to your PC
before proceeding.
• During formatting, do not turn the
camera off.
• Use sufficiently charged batteries
(P13) or AC adaptor (optional,
DMW-AC1).
• When the SD Memory Card
Write-Protect switch is slid to [LOCK],
you cannot format the card.
• If the card cannot be formatted,
consult your nearest servicenter.
PLAY
2
/
2
SETUP
TRIMMING
RESIZE
FORMAT
EXITSETSELECT
MENU
WBWB
DELETE ALL DATA
ON THE MEMORY CARD?
YES NO
FORMAT
SETSELECT
WB
WB
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@panasonic.com
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
DMC-LC80.book 93 ページ ２００４年６月１５日 火曜日 午後５時４９分