Filter
Top Products
27
VQT1T27
Preparation
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P28) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
• When the [RESET] setting is selected during recording, the operation that resets the lens is
also performed at the same time. You will hear the sound of the lens operating but this is
normal and not indicative of malfunctioning.
• When [SETUP] menu settings are reset, the following settings are also reset. In addition,
[FAVORITE] (P105) in [PLAYBACK] mode menu is set to [OFF], and [ROTATE DISP.] (P104) is
set to [ON].
– The birthday and name settings for [BABY1]/[BABY2] (P65) and [PET] (P66) in scene mode.
– The [CUST. SET MEM.] (P60) setting.
– The [TRAVEL DATE] (P71) setting. (Departure date, return date, destination)
– The [WORLD TIME] (P73) setting.
• The folder number and the clock setting are not changed.
• When [PC] is selected, the camera is connected via the “USB Mass Storage” communication
system.
• When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer
Protocol)” communication system.
• This will work when the AV cable is connected.
¢ PAL video out is not available on the version DMC-LX3P sold in the U.S.
• This will work when the AV cable is connected.
w [RESET]
The [REC] or [SETUP] menu settings are reset to the initial
settings.
x [USB MODE]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
| [VIDEO OUT]
¢
Set to match the color television system in each country.
(Playback mode only)
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
[TV ASPECT]
Set to match the type of TV.
(Playback mode only)
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
P.PC_DMC-LX3_eng.book 27 ページ ２００８年７月８日 火曜日 午後１０時１３分