Filter
Top Products
VQT1T27
70
Advanced (Recording pictures)
[REC] mode: n
Advanced (Recording pictures)
Motion Picture Mode
• When you set the picture quality to [ ], [ ] or [ ], we recommend using a high-speed
card with “10MB/s” or greater displayed on the package.
Press [MENU/SET].
Press 3/4 to select [PICTURE MODE] and then
press 1.
Press 3/4 to select the item and then press
[MENU/SET].
Slide the [REC]/[PLAYBACK] selector switch to [!].
Select the aspect ratio using the
aspect ratio selector switch.
• You cannot record motion picture in [3:2].
Set the mode dial to [n].
Press the shutter button halfway to focus
and then press it fully to start recording.
A Audio recording
• The available recording time B is displayed on the top
right and the elapsed recording time C is displayed on
the bottom right of the screen.
• After pressing the shutter button fully, release it straight
away. If the button is held down, the sound will not be
recorded for a few seconds when recording starts.
• When the subject is focused, the focus indication
lights.
• The focus and zoom are fixed to the setting when
recording starts (the first frame).
• The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
Press the shutter button fully to stop recording.
• If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
Changing the settings for the aspect ratio and the picture quality
1
2
3
4
5
1
2
3
P.PC_DMC-LX3_eng.book 70 ページ ２００８年７月８日 火曜日 午後１０時１３分