Filter
Top Products
- 115 -
Wi-Fi
You can select the method for connecting to a wireless access point.
¢ WPS refers to a function that allows you to easily configure the settings
related to the connection and security of wireless LAN devices.
To check if the wireless access point you are using is compatible with
WPS, refer to the manual of the wireless access point.
Connecting from your house (via the network)
Connection method Description of settings
[WPS (Push-Button)]
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup
TM
with a WPS mark.
Press the wireless access point WPS
button until it switches to WPS Mode.
•
Refer to the wireless access point instruction
manual for details.
e.g.:
[WPS (PIN code)]
Save PIN code type wireless access point that is compatible with Wi-Fi
Protected Setup with a WPS mark.
1 Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
2 Enter the PIN code displayed on the camera screen into
the wireless access point.
3 Press [MENU/SET].
•
Refer to the wireless access point instruction manual for details.
[From List]
Select this option when you are not sure about the WPS compatibility, or
when you want to search for and connect to a wireless access point.
•Refer to P116 for details.
Cancel
Select
Set
From List
Use button on
the WPS device
WPS (PIN code)
WPS (Push-Button)
Select connection method
WPS
WPS button