Filter
Top Products
- 94 -
Wi-Fi
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
(When connecting to a smartphone/tablet)
Press and hold [Wi-Fi], and release it after the Wi-Fi
connection lamp lights up.
•The information required for connecting the smartphone/tablet
to this unit (QR code, SSID and password) is displayed. (P97)
•If you press and hold [Wi-Fi] for too long, this unit may turn off. When this
occurs, turn on this unit again.
Pressing [Wi-Fi] before connecting to Wi-Fi
•
Following items can be selected.
Pressing [Wi-Fi] when using a Wi-Fi connection
•
Following items can be selected.
•Do not remove the memory card or battery or move to an area without any reception while
sending images.
•The monitor display may become distorted for an instant while connected to the service, however
this will not affect the image being sent.
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection
[New Connection] (P97)
[History Connection] (P119)
[Favorite Connection] (P119)
[Wi-Fi Setup] (P123)
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination]
Terminates the Wi-Fi connection, and allows you to select a
different Wi-Fi connection.
[Change Settings for Sending
Images]
Refer to P122 for details.
[Register the Current
Destination to Favorite]
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
[Network Address] Displays the MAC address and IP address of this unit.
Cancel
SSID:
Password:
Please set on your smartphone
Change method
Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings