Filter
Top Products
- 45 -
Basic
•Always reset the camera when disposing or selling it to prevent personal information saved within
the camera from being misused.
•Always reset the camera after making a copy of personal information when sending the camera in to
be repaired.
•This will work when the AV cable (optional) is connected.
•Press [MENU/SET] on the version display screen to display information about the software on the
unit.
•Do not turn the camera off during formatting.
•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the
card.
•If the card has been formatted on a PC or other equipment, format it on the camera again.
•It may take longer to format the built-in memory than the card.
•If the card cannot be formatted, please try another card before contacting Panasonic.
•If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[Reset Wi-Fi
Settings]
Reset all settings in the [Wi-Fi] menu to factory default settings.
| [TV Connection]
Set to match the colour television system in each country or the type of
TV.
[|] ([Video Out]):
[NTSC]:
Video output is set to NTSC system.
[PAL]:
Video output is set to PAL system.
[
] ([TVAspect]):
[W]:
When connecting to a 16:9 screen TV.
[X]:
When connecting to a 4:3 screen TV.
[Version Disp.]
It is possible to check which version of firmware is on the camera.
[Format]
The built-in memory or card is formatted.
Formatting irretrievably deletes all the data so check the data
carefully before formatting.
~ [Language] Set the language displayed on the screen.