Filter
Top Products
- 121 -
GPS/Sensor
Applicable modes:
Sensors (compass/altimeter/barometer) are
operated
The direction, altitude, and atmospheric pressure can be measured and recorded in the
recorded images.
•
If compass/altimeter/barometer are operated in the time settings (P27) at the time of purchase,
[GPS Setting] will be set to [ON] automatically.
Select [Sensor Settings] on the [GPS/Sensor] menu, and then press
[MENU/SET].
Press 3/4 to select [ON], and then press
[MENU/SET].
• Exit the menu after it is set.
• To switch the environment information screen, press
[DISP.] several times.
A Compass
B Altimeter
C Latitude
D Longitude
E Time positioning was performed
F Barometer
Note
•
When [GPS Setting] is set to [OFF], the latitude/longitude and positioning timing are not
displayed.
• They keep working when the power is turned off. If you do not wish the compass/altimeter/
barometer to keep working when the power is turned off, set [Airplane Mode] to [ON]. (P131)
• For motion pictures
¢
, the direction, altitude and atmospheric pressure measured at the start of
the recording are recorded.
¢ When recording using [MP4] or [GFS]/[GS] in [AVCHD]
B
F
D
C
E
A