Filter
Top Products
- 21 -
Preparation
Inserting and Removing the Card (optional)/the
Battery
• Check that this unit is turned off.
• Confirm that there is no foreign object. (P10)
• We recommend using a Panasonic card.
1:Slide the [LOCK] switch A, and release
the lock.
2:Slide the release lever B and open the
side door.
• Always use genuine Panasonic batteries.
• If you use other batteries, we cannot guarantee
the quality of this product.
Battery: Being careful about the battery
orientation, insert all the way until you
hear a locking sound and then check that
it is locked by lever C. Pull the lever C in
the direction of the arrow to remove the
battery.
Card: Push it securely all the way until you
hear a “click” while being careful about
the direction in which you insert it. To
remove the card, push the card until it
clicks, then pull the card out upright.
D:Do not touch the connection terminals of the
card.
Close the side door until it clicks, and then
lock the [LOCK] switch by sliding it toward
[1].
• Confirm that the red part on the [LOCK] switch is not
showing.
ロヰヤレ
モヷチヰヶヵチバチュリヨリヵモロ
ロヰヤレ