Filter
Top Products
VQT4P34
Basics
Adjusting focus
- 24 -
When [AF Mode] is set to (1-area-focusing), focus on the AF area in the centre of the
picture. If a subject you want to record is not in the centre, follow the steps below.
Adjust focus according to subject
Align the AF area
with the subject
Hold down halfway
Focus display
( When focus is aligned: illuminated
When focus is not aligned: flashing)
AF area
( When focus is aligned: green
When focus is not aligned: red)
Return to desired composition
Press fully
AF area
●
Subjects/environments which may
make focusing difficult:
• Fast-moving or extremely bright
objects, or objects with no colour
contrast.
• Taking pictures through glass or
near objects emitting light.
• In dark, or with significant jitter.
• When too close to object or when
taking pictures of both distant and
close objects together in the same
picture.
●
The focus display flashes and beep sounds when focus is not
aligned.
Use the focus range displayed in red as a reference.
Even if the focus display is lit, the camera may be unable to
bring the subject into focus if it is out of range.
●
The AF area display may be larger depending on recording
conditions such as dark locations or zoom ratio.
Focus display
Focus range