Filter
Top Products
VQT4P34
Application (Record)
Burst function
- 88 -
A burst of still pictures can be recorded while the shutter button is pressed fully.
Select [Burst] from the [Rec] menu (→42)
Use cursor button to select the burst setting, and press
[MENU/SET]
Setting Speed Description
No. of
pictures
Approx. 2
pictures/sec.
• The subject is brought into focus as far as this
is allowed by the burst speed. The pictures are
taken with the burst function while the exposure
and White Balance are being adjusted.
• The burst speed may be reduced under certain
recording conditions.
100
*
1
Approx. 5
pictures/sec.
*
2
([Hi-Speed
Burst])
Complies with
recording
conditions
Speed: Approx. 10 pictures/sec.
• Note on the available picture size settings (→89).
• The number of Burst recording pictures may
increase when you use a card with fast writing
speed or card is formatted.
• The focus, zoom, exposure, White Balance,
shutter speed, and ISO sensitivity are all fixed
to the settings for the first picture.
100
*
1
*
2
([Flash
Burst])
Complies with
recording
conditions
• The burst of still pictures can be recorded even
in low light conditions as the flash is used.
• The focus, exposure, and flash level are all
fixed to the settings for the first picture.
• Note on the available picture size settings (→89).
5
[OFF] — The burst function is released. —
*
1
The number of burst pictures is limited by the picture-taking conditions and the type and/or
status of the card used.
*
2
Only in [Program AE], [Aperture-Priority] and [Shutter-Priority] modes