Filter
Top Products
GPS
Reducing the time required for positioning
VQT5E74
- 267 -
■
Using “GPS Assist Tool” by connecting the camera and computer
Preparation:
Turn on the computer and close all other open application programs.
Select [Assist Data] from [GPS] menu and press [MENU/SET]
Use to select [Update] and press [MENU/SET]
Use to select [Connect USB] and press [MENU/SET]
Connect the camera to a computer
Check the plug direction and insert it straight in.
(If the cable is inserted in the wrong direction, the
plug could become deformed and cause faulty
operation)
Also, do not insert into the wrong socket. Doing so
may cause damage to this unit.
[Access] (sending data)
• Do not disconnect
the USB connection
cable (supplied) while
[Access] is displayed.
USB connection cable (supplied)
Start up the “GPS Assist Tool” on your computer and update
the GPS assist data (→269)
The GPS assist data of the camera is updated.
Terminate the connection between the camera and computer
and disconnect the USB connection cable (supplied)
●
You can also update the assist data if you select [GPS assist data] for [USB Mode]
(→72) when you connect the camera to a computer.
●
Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (optional). Using cables other than the above may
cause a malfunction.