30 SQT0612 (ENG)
Using the camera by connecting it to a
smartphone/tablet
You can connect to and operate this unit using a smartphone by following
three steps.
STEP 1 Preparing the smartphone:
Installing the special app “Panasonic Image App”
∗
1
∗
1
Hereafter “Image App”
The “Image App” is an application provided by Panasonic.
• Supported OS
iOS: iOS 6.0 or later
∗
2
Android™: Android 2.3.3 or later
∗
3
∗
2
iPhone 3GS is not supported.
∗
3
To connect this unit with [Wi-Fi Direct], Android OS 4.0 or above is required and the
device must be compatible with Wi-Fi Direct™.
Connect the smartphone to a network
<Using an iOS device (iPhone, iPod touch, iPad)>
Select “App Store
SM
”
<Using an Android device>
Select “Google Play
TM
Store”
Enter “Panasonic Image App” or “LUMIX” to search for the
app
Select “Panasonic Image App” and install it
• Use the latest version.
• Supported OS versions as of January 2015. Supported OS versions may be changed
without prior notice.
• Some of the screens and information provided in this document may be different depending
on the supported operating system and “Image App” version.
• The service may not be able to be used properly depending on the type of smartphone
being used.
• For details about the operating procedure, etc., refer to [Help] in the “Image App” menu.
• For the latest information on the “Image App”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.)