70
VQT4C31
Dividing a scene to partially delete
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥ Change the mode to .
1 Select the menu.
2 Select the scene you wish to divide using the cursor button and
press the ENTER button.
3 Select to set the dividing point.
≥ It is convenient to use Slow-motion Playback and
Frame-by-frame Playback. (l 63)
≥ Set to at least 2 seconds for the portions to be
deleted and at least 3 seconds for the portion that
is to remain.
4 Select the part for deletion, then press the ENTER button.
5 Select [YES] and press the ENTER button to confirm (play back) the
part for deletion.
≥ A confirmation message appears when [NO] is selected.
Proceed to
Step
7.
6 Stop the playback.
≥ A confirmation message appears.
7 Select [YES] and press the ENTER button.
≥ To continue dividing and deleting other scenes, repeat
Step
s 2-7.
To complete dividing
≥ Press the MENU button.
≥ It may not be possible to divide scenes with a short recording time.
≥ The actual division may slightly slip off the previously designated dividing point.
: [EDIT SCENE] # [SPLIT&DELETE]
0h00m15s0h00m15s0h00m15s
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 70 ページ 2012年1月13日 金曜日 午後8時2分