Filter
Top Products
74
VQT4C31
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
≥ When this setting is set to [4:3] and the
unit is connected to a television using the
AV cable, the image may appear in a
shrunken form.
Example of images with a [16:9] aspect
ratio on a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen
(operation icon and time code etc.) can be
displayed/not displayed on the TV.
* This setting is only available in Recording
Mode.
Connecting with a HDMI mini cable
Select the desired method of HDMI output.
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[720p] or [480p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ When [REC MODE] is set to [640k480/60p] mode, video will be output in 480p, even if
[HDMI RESOLUTION] is set to [720p].
(the menu display will turn to [AUTO] or [480p])
: [SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
: [SETUP] # [EXT. DISPLAY] #
desired setting
[SIMPLE]*: Information partially
displayed
[DETAIL]: All information
displayed
[OFF]: Not displayed
Refer to the following support site for information about Panasonic TVs with an SD
card slot for playing back your pictures.
http://panasonic.net/
≥ For details on how to play back, please read the operating instructions for the TV.
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[720p]/[480p]
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 74 ページ ２０１２年１月１３日 金曜日 午後８時２分