![](http://pdfasset.owneriq.net/8/b9/8b905bfc-1818-4d9f-9036-4881c6a10799/8b905bfc-1818-4d9f-9036-4881c6a10799-bg82.png)
- 130 -
∫ When connecting by [Manual Setting]
1 Touch [Manual Setting].
2 Touch [INPUT], then Enter the SSID of the wireless access point.
≥ For details on how to enter characters, refer to page 65.
≥ When the entry is complete, touch [Enter].
3 Touch [NEXT], and then touch the desired Network authentication method.
≥ When [WEP] is selected, proceed according to step 5.
4 Touch the desired Encryption method
≥ If you select [NONE], a message is displayed after completing the connection.
5 (When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], the enter the Password.
≥ For details on how to enter characters, refer to page 65.
≥ When the entry is complete, touch [Enter].
6 Touch [NEXT]
≥ A message is displayed when the connection is complete.
≥ Check the wireless access points instruction manual and settings when a saving wireless access
point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We
recommend you connect with the strongest possible Encryption method.
≥ If no connection can be established, the wireless access point’s radio waves may be too weak.
Refer to
“Messages”(l 171) and “Troubleshooting”(l 173) for details.
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Network authentication type Encryption types that can be set
[Open]
[NONE]/[WEP]
[WEP]
There is no setup of an encryption types.
[WPA-PSK]/[WPA2-PSK]
[TKIP]/[AES]
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j is displayed on the screen
When the preparations for the Wi-Fi function (l 120) and the Wi-Fi connection are
complete, you can use the following functions:
j[Link to Cell] (l 135)
j[DLNA Play] (l 140)
j[Live Cast] (l 141)
j[Home Cam] (l 144)