Filter
Top Products
- 31 -
Set the display method for the screen information display.
Please refer to page 18.
It is possible to display and record the time at the travel destination by selecting your home region
and the travel destination.
1 Select the menu.
≥ If the clock is not set, adjust the clock to the current time. (l 18)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] and
proceed to Step 3.
2 (Only when setting your home region)
Touch [HOME].
≥ Touch [ENTER].
3 (Only when setting your home region)
Touch / to select your home
region and touch [ENTER].
≥ Touch [DAYLIGHT SAVING] to set daylight
saving time. appears and the summer
time setting is turned on; the time difference
from GMT is set forward by one hour. Touch
[DAYLIGHT SAVING] again to return to the
normal time setting.
4 (Only when setting the region of your
travel destination)
Touch [DESTINATION].
≥ Touch [ENTER].
≥ When the home region is set for the first time, the screen for selecting home/travel destination
appears after setting the home region successively. If the home region has already been set
once, execute the menu operation for Step 1.
Basic
Using the Setup Menu
[DISPLAY]
: [SETUP] # [DISPLAY] # desired setting
[5 SECONDS]: Information is displayed on the screen for 5 seconds after starting the
Motion Picture Recording Mode or Still Picture Recording Mode, starting
to playback, or touching the screen.
[ON]: Constantly displayed.
[CLOCK SET]
[SET WORLD TIME]
: [SETUP] # [SET WORLD TIME]
MENU
MENU
A The current time
B The time difference from GMT
(Greenwich Mean Time)