69
VQT3Y41
Directivity of the microphone is synchronized with the zoom operation. Sounds near the front
of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
1 Select the menu.
2
(When [SETr ]/[SET] is selected)
Touch / to adjust.
≥ Touch to activate/disactivate AGC. When AGC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When
AGC is disactivated, natural recording can be
performed.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3 Touch [ENTER] to set the microphone input level and then touch [EXIT].
≥ (Microphone input level meter) appears on the screen.
≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥ The microphone input level meter shows the larger of the inputs from the 2 built-in
microphones.
≥ You cannot record with the audio completely muted.
[ZOOM MIC]
: [RECORD SETUP] # [ZOOM MIC] # [ON]
[MIC LEVEL]
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: AGC is activated, and the recording level is adjusted
automatically.
[SETr ]/[SET]: The desired recording level can be set.
MENU
MENU
A Left
B Right
C Microphone input level
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 69 ページ 2011年12月28日 水曜日 午前10時21分