![](http://pdfasset.owneriq.net/8/a8/8a85aec3-0a47-47c1-9da9-43402f49ad28/8a85aec3-0a47-47c1-9da9-43402f49ad28-bg87.png)
- 135 -
Using NFC, you can easily set up a direct connection between this unit and the smartphone.
∫ If the device is Android (NFC-compatible)
Use NFC to set up a direct connection between this unit and the smartphone.
≥ Proceed to “Using [Link to Cell] with a direct connection”. (l 136)
∫ If the device is Android (non-NFC-compatible) or iOS
Operate this unit and the smartphone to set up a direct connection.
For US customers enter SSID and Password or scan QR code to connect.
≥ [WPS Connection] (l 169)
≥ Connecting with QR code (l 169)
≥ Connecting by entering an SSID and Password (l 170)
When the Wi-Fi connection is complete, proceed to “Using [Link to Cell] with a direct connection”.
(l 136)
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ [WPS Connection] (l 165)
≥ Searching for wireless access points to set up a connection (l 166)
≥ Setting up a connection manually (l 167)
When the Wi-Fi connection is complete, proceed to “Using [Link to Cell] with a wireless access point
connection”. (l 137)
≥ Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 164)
Setting up a direct Wi-Fi connection between this unit and a
smartphone
Setting up a Wi-Fi connection via a wireless access point