Filter
Top Products
- 151 -
Playing back on a TV
You can play back the scenes and still pictures recorded with or stored in this unit on a TV.
≥ The following scenes can be played back:
jScenes recorded in AVCHD
jScenes recorded in MP4/iFrame [720]
jScenes saved in MP4 (High Quality) or MP4 (Low Quality)
1 Press Wi-Fi button and touch [DLNA Play].
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
≥ If you touch [CANCEL], the Wi-Fi connection is canceled.
≥ When the connection is complete, the screen of this unit turns off. To display it again, touch the
screen.
2 Select this unit (SSID) by the TV side.
≥ Select SD media and select the motion picture ([AVCHD/MP4]) or still picture ([JPEG]) to play
back.
3 Perform playback operations with the TV remote control.
≥ Playback operations may differ depending on the TV in use.
≥ The following operations can be performed if a color button is
pushed.
Blue/Red: Skip playback
≥ Fast forward/Fast rewind playback cannot be performed.
≥ You cannot perform playback operations with this unit.
To exit [DLNA Play]:
Touch [EXIT] or press Wi-Fi button.
≥ A message is displayed. Touch [YES] to exit.
≥ Scenes recorded in the following [REC MODE] can not be played back:
jMP4/iFrame: [1080/50M]/[1080/28M]/[iFrame]
≥ The scenes may not be played back smoothly depending on your environment, such as the
network condition.
(Examples of operations during
motion picture playback)
A Skip playback
B Stop
C Playback/Pause