Panasonic HC-W850 Camcorder User Manual


 
- 216 -
Connecting the Remote Pan Tilt Cradle to this unit. (l 214)
Set [Panning Angle]/[Tilt Angle]/[Tilt Speed] in advance. (l 218)
1 Touch the desired Remote Pan Tilt Cradle Mode.
If you touch [SETUP], the Setup menu will be displayed. (l 218)
2 (When [Manual] is selected)
Touch , and operate the Remote Pan Tilt Cradle with / / / .
When you finish the operation, touch [ENTER].
3 Press the recording start/stop button.
(When [Party Scene]/[Moving Object] is selected)
Before recording starts, the Remote Pan Tilt Cradle rotates and returns to its home position. It
takes time until recording starts.
The Remote Pan Tilt Cradle operates within the range set in advance.
(When [Manual] is selected)
Performing the operation of Step 2 during recording may cause the recording screen to shake or
the Remote Pan Tilt Cradle to move from its original location.
To switch the Remote Pan Tilt Cradle Mode
Touch .
The selection screen of the Remote Pan Tilt Cradle Mode is displayed. Touch the desired mode.
To exit the Remote Pan Tilt Cradle
Touch [EXIT].
The Remote Pan Tilt Cradle rotates and returns to its home position.
After the operation, the Remote Pan Tilt Cradle turns off. Before removing this unit, disconnect
the USB cable.
Using the Remote Pan Tilt Cradle
Mode
Operation of the
Remote Pan Tilt Cradle
Description
[Party Scene]
The operation is
automatic.
The Remote Pan Tilt
Cradle works within the
recording range set in
[Panning Angle]/[Tilt
Angle].
At an event such as a party, recording will be
performed while the Remote Pan Tilt Cradle
automatically controls the recording direction
within the recording range.
When a person or a moving object is
detected, recording of the person or the
object takes priority for a specific period of
time.
[Moving Object]
When a moving object is detected within the
recording range, the object will be tracked and
recorded automatically.
[Manual]
The operation is manual. This mode lets you manually operate the
Remote Pan Tilt Cradle.