Filter
Top Products
66
VQT1A15
Recording
≥The centre of the screen is not enlarged if
[MF ASSIST] is set to [OFF].
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down
again to the FOCUS position.
≥You can also restore the auto focusing by
setting the AUTO/MANUAL/FOCUS switch to
AUTO.
≥The subject may not be in focus when zoomed
in if focusing with a wide angle. First, zoom in
on the subject, and then focus on it.
The centre of the screen is enlarged during
manual focus adjustment. This allows you to
focus on the subject more easily.
≥MF assist does not work if the zoom
magnification is more than 12k.
≥The part of the screen that is enlarged is not
enlarged on the image actually recorded.
≥The zebra pattern does not appear on the part
of the screen that is enlarged when [ZEBRA] is
[ON].
(RAM) (-RW) (-R) (-R\DL) (SD)
The automatic white balance function may not
reproduce natural colours depending on the
scenes or lighting conditions. If so, you can
adjust the white balance manually.
¬
Rotate the mode dial to select .
1 Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2 Move the cursor button up to
select [ ].
3 Move the cursor button left or
right to select the white balance
mode.
About the MF assist function
White balance
This is for recording in natural
colours.
VQT1A15ENG.book 66 ページ ２００７年１月２９日 月曜日 午後８時２４分