Filter
Top Products
75
VQT1J42
Recording
If auto focusing is difficult due to the conditions,
then use manual focus.
¬Rotate the mode dial to select or
.
1 (When MF assist function is used)
(HD mode only)
Press the MENU button, then
select [ADVANCED]
#
[MF ASSIST]
# [ON] and press
the cursor button.
2 Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
3 Move the switch down and set it
to FOCUS position.
The manual focus indication [MF] and the icon
shown in the illustration appear.
4 Move the cursor button left or
right to bring the subject into
focus.
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down
again to the FOCUS position.
≥ You can also restore the auto focusing by
setting the AUTO/MANUAL/FOCUS switch to
AUTO.
≥ The subject may not be in focus when zoomed
in if focusing with a wide angle. First, zoom in
on the subject, and then focus on it.
The center of the screen is enlarged during
manual focus adjustment. This allows you to
focus on the subject more easily.
The normal screen returns approximately
2 seconds after you finish bringing the subject
into focus.
≥ The center of the screen is not enlarged if
[MF ASSIST] is set to [OFF].
≥ MF assist does not work if the zoom
magnification is more than 10k.
≥ The part of the screen that is enlarged is not
enlarged on the image actually recorded.
≥ The zebra pattern does not appear on the part
of the screen that is enlarged when [ZEBRA] is
[ON].
Manual focus adjustment
VIDEO
PHOTO
About the MF assist function
(HD mode only)
VQT1J42ENG.book 75 ページ ２００７年７月２０日 金曜日 午前１０時３６分