Filter
Top Products
84
VQT1Z09
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
p Press the FUNCTION button. (F 82)
1 Touch [SHTR] or [IRIS].
p When using the viewfinder, press the
FUNCTION button. (F 82)
2 Touch / to adjust settings.
p When using the viewfinder, rotate the multi
manual ring and set it. (F 82)
Shutter speed:
1/60 to 1/8000
p If [AUTO SLOW SHTR] is set to [ON], the
shutter speed will be set between 1/30 and
1/8000.
p If [DIGITAL CINEMA] is set to [ON], the shutter
speed will be set between 1/48 and
1/8000. (When [AUTO SLOW SHTR] is set to
[ON], the range is 1/24 to 1/8000.)
p The shutter speed closer to 1/8000 is faster.
p The shutter speed will be set between 1/2 and
1/2000 in Still Picture Recording Mode.
Iris/Gain value:
CLOSE (F16 to F2.0) OPEN (0dB to
18dB)
p Value closer to [CLOSE] darkens the image.
p Value closer to [18dB] brightens the image.
p When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
p To return to auto setting, press the FUNCTION
button again. When using a viewfinder, press
the FUNCTION button to select the , rotate
multi manual ring to select [CANCEL], and
press the FUNCTION button again.
p When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
p When the shutter speed is set lower than 1/15
in the Still Picture Recording Mode, using a
tripod is recommended. Also, white balance
cannot be set. The shutter speed will be set to
1/30 when the power is turned on again or
when the quick start is performed.
p If you increase the shutter speed manually, the
noise on the screen may increase.
p You may see a band of light around an object
that is shining very bright, or highly reflective.
p During normal playback, image movement
may not look smooth.
p If you record an extremely bright object or
record under indoor lighting, color and screen
brightness may change or a horizontal line
may appear on the screen. In this case, record
in Auto Mode or set the shutter speed to 1/60
in areas where the power supply frequency is
60 Hz, or 1/100 in areas of 50 Hz.
Manual iris/gain adjustment
p Luminance level and histogram are displayed
during the iris adjustment. (F 76, 77)
p If the gain value is increased, the noise on the
screen increases.
p Depending on the zoom magnification, there
are iris values that are not displayed.
Manual shutter speed/iris adjustment
F
IRISSHTRWB
1/1001001/100
SHTR
IRIS