Filter
Top Products
31
VQT3K69
∫ To display the Touch Menu
≥ Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.
≥ Perform the touch screen calibration when the touch is not recognized or wrong location is
recognized. (l 52)
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1 Select the menu. (l 44)
2 Touch the date or time to be set, then set the desired value using /
.
A Displaying the World time setting (l 46):
[HOME]/ [DESTINATION]
≥ The year can be set between 2000 and 2039.
≥ The 12-hour system is used to display the time.
3 Touch [ENTER].
≥ A message prompting for World time setting may be
displayed. Perform the World time setting by touching the screen. (l 46)
≥ Touch [EXIT] to complete the setting.
≥ The date and time function is driven by a built-in lithium battery.
≥ When this unit is purchased, the clock is set. If the time display becomes [- -], the built-in
lithium battery needs to be charged. To recharge the built-in lithium battery, connect the AC
adaptor or attach the battery to this unit. Leave the unit as it is for approx. 24 hours and the
battery will maintain the date and time for approx. 6 months. (The battery is still being
recharged even if the unit is off.)
The Touch Menu will disappear when no function is
performed for a specific period of time during
Recording mode. To display it again, touch .
Preparation
Setting date and time
: [SETUP] # [CLOCK SET]
MENU
HDCTM900&HS900P&PC-VQT3K69_mst.book 31 ページ ２０１０年１２月１６日 木曜日 午後７時８分