93
VQT3K69
Highlight Playback
Part that was recognized as clearly recorded is extracted from a long recording, and it can be
played back in a short time with effects and music added.
≥ Highlight playback cannot be used for iFrame scenes.
1 Touch . (l 30)
2 (Only when you would like to change the settings)
Touch [SET] to select the item to change.
3 Touch [START].
≥ When the [SCENE SETUP] is not changed in step 2, it will playback with the last recorded
date.
4 Select the playback operation. (l 41, 89)
≥ When the playback is finished or stopped, the screen to select [REPLAY],
[SELECTAGAIN] or [EXIT] is displayed. Touch the desired item.
≥ Playing back of all the scenes returns if the unit is turned off or the mode is changed.
≥
Slow-motion playback, frame-by-frame playback, and direct playback bar operation are not possible.
≥ Highlight playback cannot be performed with interval-recorded motion pictures. (l 68)
∫ Scene setting
1 Touch [SELECT SCENES] or [SELECT DATE].
2 (When [SELECT SCENES] is selected)
Touch the scenes to be played back.
≥ Up to 99 scenes can be selected in succession.
≥ When touched, the scene is selected and is displayed.
Touch the scene again to cancel the operation.
(When [SELECT DATE] is selected)
Touch the date to be played back.
≥ A maximum of 7 days can be selected.
≥ When touched, the date is selected and surrounded by red.
Touch the date again to cancel the operation.
3 Touch [Enter]/[ENTER].
[SCENE SETUP]: Select the scene or date to be played back.
[PRIORITY SETUP]: Select the target to give priority to play back. (l 94)
[PLAYBACK TIME]: Select the time to play back. (l 94)
[EFFECT SETUP]: Select the effect for playback. (l 94)
[MUSIC SELECT]: Select the music to be played on playback. (l 94)
ALL
HDCTM900&HS900P&PC-VQT3K69_mst.book 93 ページ 2010年12月16日 木曜日 午後7時8分