Filter
Top Products
125
VQT1Y00
With a PC
Setup
2
Connecting to a PC
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1 Connect this unit to the AC
adaptor.
≥ It is possible to use the unit connected to the
PC with the batteries only, but you will not be
able to write data into the unit.
2 Turn on the unit.
≥ This function is available in all modes.
3 Connect this unit to a PC.
The USB function selection screen will appear.
≥
Insert the USB connectors as far as they will go.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
4 Touch [PC].
≥
This unit is automatically recognized as an
external drive of the PC. (
l
127)
≥ When the unit is connected to a PC, its
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
≥ Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or card
access icon ( ) appears on the unit screen.
≥
Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or built-in
memory access icon ( ) appears on the unit
screen.
≥
Do not disconnect the USB cable or the AC
adaptor while the HDD access lamp is on or
HDD access icon ( ) appears on the unit
screen.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 125 ページ ２００８年１２月２２日 月曜日 午後８時１６分