60
VQT1Y00
Recording
Recording (Basic)
7
Recording with the video
light
The video light enables brightening of the images taken in a dimly-lit place.
¬Change the mode to .
≥ This function’s default setting is / .
≥ Auto video light will turn on/off automatically according to the brightness.
≥ Auto video light will turn on/off in conjunction with Low Light mode in Intelligent auto mode.
≥ Using the video light reduces battery time.
≥ The subject should be within 1.5 m (5 feet) of the unit.
≥ Do not look directly into the light.
≥ Using the MagicPix function at the same time will make conditions even brighter.
≥ We recommend using the video light in a bright place to obtain high quality images.
≥ If you turn off the power or change the mode, the video light is turned off.
≥ Set the video light to off where using a light is prohibited.
LIGHT
LIGHT button
Each time the LIGHT button is pressed,
the indication changes by one setting in
the following order.
# / # Setting canceled
: Video light on
/ : Auto video light on/off
≥ The video light cannot be used when the conversion lens is used, because the light is blocked.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 60 ページ 2008年12月22日 月曜日 午後8時16分