Filter
Top Products
124
VQT1Z09
8 Touch [PAPER SIZE] to select the
paper size setting.
[STANDARD]: Size specific to the printer
[4M5 INCH]: L size
[5M7 INCH]: 2L size
[4M6 INCH]: Postcard size
[A4]: A4 size
p You cannot set paper sizes not supported on
the printer.
9 Touch [PAGE LAYOUT] to select
the desired layout setting.
[STANDARD]: Layout specific to the printer
: No frame print
:Frame print
p You cannot set page layouts not supported on
the printer.
p Touch .
10
Touch to print the pictures.
p When the confirmation message appears,
touch [START].
p Exit PictBridge by disconnecting the USB cable
(supplied) after the pictures have been printed.
When you stop printing halfway
Touch [CANCEL].
p A confirmation message appears. If [YES] is
selected, the number of prints set is canceled
and the screen returns to step 4. If [NO] is
selected, all the settings are kept and the
screen returns to step 4.
p Avoid the following operations during printing.
These operations disable proper printing.
LDisconnecting the USB cable
LOpening the SD card cover and removing
the SD card
LChanging the mode
LTurn the unit off
p The edges of still pictures recorded in this unit
with a 16:9 aspect ratio may be cut off. When
using a printer with a trimming or borderless
printing function, cancel this function before
printing. (Refer to the operating instructions of
the printer for details.)
p When the unit is connected directly to the
printer, the DPOF settings cannot be used.
1