Panasonic HDC-TM300P/PC Camcorder User Manual


 
90
VQT1Z09
A single frame from the recorded motion picture
can be saved as a still picture.
Picture size of the still picture to be recorded is
(1920M1080).
1 Pause at the scene you want to
save as a still picture during
playback.
p It is convenient to use slow-motion playback
and frame-by-frame playback.
2 Press the button fully.
Still picture is recorded and will be saved on the
same media as the motion picture.
p Date the motion picture was recorded will be
registered as date of the still picture.
p Quality will be different from the normal still
picture.
An image of one scene is displayed as a
thumbnail at set time interval. Scene can be
played back from any midway point of the scene
you wish to see.
p Move the zoom lever to K side and change
over the thumbnail display to
Highlight&Time frame index. (F 88)
1 Touch the set time selection.
Set time selection
Scene selection
p Next (previous) scene can be displayed by
touching / .
2 Touch and select time to be set.
p A portion judged to be clearly recorded will be
detected and displayed in thumbnail if you
select [HIGHLIGHT]. The thumbnail may not
be displayed if the part recognized as clearly
recorded cannot be detected.
3 Touch the thumbnail to be played
back.
p Next (previous) thumbnail can be displayed by
touching / .
Creating still picture from
motion picture
2.1
M
Highlight&Time frame index