Panasonic HX-DC2 Camcorder User Manual


 
184 VQT4F46
When disposing of or giving away this unit, note that:
When the built-in memory undergoes [FORMAT], the file management
information is changed but not all of the data in the built-in memory is
deleted. It may be possible to recover the data using commercially
available data-recovery software.
When disposing of/giving away the unit,
we recommend that you physically format
the built-in memory of the unit.
To perform a physical format, connect the
unit to the AC adaptor, remove the card,
select [FORMAT] # [DELETE DATA]
from the option menu 2 and follow the on-
screen instructions.
Please look after the data in your built-in memory carefully. Panasonic
will not be held responsible in the unlikely case that private data is
divulged.
The battery used in this unit is a rechargeable lithium-ion battery. It is
susceptible to humidity and temperature and the effect increases the
more the temperature rises or falls. In cold areas, the full charge
indication may not appear or the low battery indication may appear about
5 minutes after starting use. At high temperatures, the protection function
may be triggered, making it impossible to use the unit.
Be sure to detach the battery after use.
If the battery is left attached, a minute amount of current continues to
flow even if the unit is off. Keeping the unit in this state may result in
over discharge of the battery. This may result in you not being able to
use the battery even after it is charged.
The battery should be stored in the vinyl bag so metal does not come
into contact with the terminals.
The battery should be stored in a cool place free from humidity, with as
constant temperature as possible. (Recommended temperature: 15 oC
to 25 oC (59 °F to 77 °F), Recommended humidity: 40%RH to 60%RH)
Extremely high temperatures or low temperatures will shorten the life
of the battery.
About the battery
Delete all data in
Built-in Memory?
HX-WA20PPPCPU-VQT4F46_mst.book 184 ページ 2012年2月14日 火曜日 午後5時10分