Panasonic HX-DC2 Camcorder User Manual


 
VQT4F46 45
The unit does not go into standby mode when you close the LCD
monitor during motion picture recording or audio recording.
If you open the LCD monitor when in standby mode, the unit enters
recording mode.
In the following cases, opening the LCD monitor does not turn on the
unit. Press the power button to turn on the unit.
jWhen the unit is originally purchased
jWhen you have turned off the unit using the power button
About economy function
To prevent battery consumption due to forgetting to turn the unit off etc.,
the economy mode function works to send the unit into sleep mode if the
unit has been on for approximately 5 minutes (default setting) without an
operation being performed. (The LCD monitor switches off, and the
status indicator flashes green)
When the unit is in sleep mode, you can turn on the unit by pressing
any of the buttons on the unit. (The mode prior to entering sleep mode
is restored)
The time until the unit goes into sleep mode can be changed. (l 71)
Approximately 1 hour after entering sleep mode, the unit enters
standby mode.
Standby mode To turn on the unit
HX-WA20PPPCPU-VQT4F46_mst.book 45 ページ 2012年2月14日 火曜日 午後5時10分