Panasonic HX-WA2 Camcorder User Manual


 
VQT4F46 183
When you use the unit in a sandy or dusty place such as a beach,
do not let sand or fine dust get into the body and terminals of the
unit.
Sand or dust may damage the unit. (Care should be taken when
inserting and removing a card.)
Keep the unit away from sea water.
If sea water splashes onto the unit, wipe off the water with a well wrung
cloth. Then wipe the unit again with a dry cloth.
When carrying the unit, do not drop or bump it.
A strong impact can break the unit’s casing, causing it to malfunction.
Cleaning
Before cleaning, detach the battery or pull the AC adaptor from the AC
outlet, and then wipe the unit with a soft, dry cloth.
If the unit is very dirty, dip a cloth in water and squeeze firmly, and then
wipe the unit with the damp cloth. Next, dry the unit with a dry cloth.
Use of benzine, paint thinner, alcohol, or dishwashing liquid may alter
the camera body or peel the surface finish. Do not use these solvents.
When using a chemical dust cloth, follow the instructions that came
with the cloth.
Do not use the unit for surveillance purposes or other business
uses.
This unit was designed for consumer intermittent use. It was not
intended for continuous use, or for any industrial or commercial
application resulting in prolonged use.
In certain situations, continuous use could cause the unit to overheat
and cause a malfunction. Such use is strongly discouraged.
When you are not going to use the unit for an extended time
When storing the unit in a cupboard, it is recommended that you place
a desiccant (silica gel) in with it.
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 183 ページ 2012年2月14日 火曜日 午後5時10分