Filter
Top Products
- 214 -
Major confirmation/error messages to be indicated on the screen in text.
Others
Messages
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this indication appears despite motion pictures, still pictures and
audio being recorded on the SD card, the SD card may be in an
unstable state. Re-insert the SD card and turn the unit off and on
again.
CARD FULL.
Built-in Memory full.
There is no space on the SD card or in built-in memory. Please delete
unneeded files or use an SD card with space on it.
Card is protected
The write protection switch on the SD card is in the LOCK position.
Please unlock the write protect switch. (l 31)
Overheat. Turn off camera now.
INTERNAL TEMPERATURE TOO HIGH. PLEASE TURN UNIT OFF
AND WAIT A WHILE.
The temperature within the unit is increasing. Turn the power off and
wait until the temperature decreases before starting recording again.
(l 37)
Failed to connect wireless access point
No wireless access point found
Check the Wi-Fi setup of your wireless access point and smartphone.
[Easy Connection (WPS)] can establish a connection only between
two devices: the unit and a device that will connect to the unit. Check
if multiple devices are trying to establish a connection in the WPS
waiting state simultaneously.
Refer to “If the Wi-Fi connection cannot be established” on page 178.
Connection failed.
Refer to “If the Wi-Fi connection cannot be established” on page 178.