Panasonic HX-WA3 Camcorder User Manual


 
- 226 -
Do not spray insecticides or volatile chemicals onto the unit.
If the unit is sprayed with such chemicals, its body may be marred and
the surface finish may peel off.
Do not leave rubber or plastic products in contact with the unit for a
long time.
When you use the unit in a sandy or dusty place such as a beach,
do not let sand or fine dust get into the body and terminals of the
unit.
Sand or dust may damage the unit. (Care should be taken when
inserting and removing a card.)
When carrying the unit, do not drop or bump it.
A strong impact can break the unit’s casing, causing it to malfunction.
Cleaning
Before cleaning, detach the battery or pull the AC adaptor from the AC
outlet, and then wipe the unit with a soft, dry cloth.
If the unit is very dirty, dip a cloth in water and squeeze firmly, and then
wipe the unit with the damp cloth. Next, dry the unit with a dry cloth.
Use of benzine, paint thinner, alcohol, or dishwashing liquid may alter
the camera body or peel the surface finish. Do not use these solvents.
When using a chemical dust cloth, follow the instructions that came
with the cloth.
Do not use the unit for surveillance purposes or other business
uses.
This unit was designed for consumer intermittent use. It was not
intended for continuous use, or for any industrial or commercial
application resulting in prolonged use.
In certain situations, continuous use could cause the unit to overheat
and cause a malfunction. Such use is strongly discouraged.