Filter
Top Products
Useful Information
18 For assistance, please visit http://www.panasonic.com/phonehelp
Mounting the cordless camera on the wall
Standard mounting
Upside down mounting
LThe image may be seen upside down when mounting upside down. To compensate for
this, change the cordless camera setting to display images upside down (page 10).
1 Drive the screws (not included) into the
wall at a recommended height of 1.8 m
(5.9 feet) or below using the wall
mount template as a guide (page 19).
2 Mount the cordless camera (A), then
slide it down (B) and to the right (C)
until it is secure.
LTo aim the camera lens, see page 9.
1 Drive the screws (not included) into the
wall at a recommended height of 1.8 m
(5.9 feet) or below using the wall
mount template as a guide (page 19).
2 Mount the cordless camera (A), then
slide it down (B) and to the left (C)
until it is secure.
Screws
50.8 mm
(2 inches)
(120 V AC, 60 Hz)
A
B
C
Screws
50.8 mm
(2 inches)
(120 V AC,
60 Hz)
A
B
C
TGA573(e).book Page 18 Monday, April 24, 2006 2:05 PM