Panasonic DMC-LZ5 Digital Camera User Manual


 
Preparation
19
VQT0U87
Setting Date/Time
(Clock Set)
Initial setting
The clock is not set so the following screen
appears when you turn the camera on.
A: [MENU/SET] button
B: Cursor buttons
The screen disappears after about
5 seconds. Turn the camera off and on
again.
1 Press [MENU/SET].
2 Press 3 4 2 1 to select the
date and time.
2/1: Select the desired item.
3/4: Set the display order for the date
and time.
3 Press [MENU/SET] several times
to close the menu.
Turn the camera off after finishing
setting the clock. Then turn it on and
check that the clock setting is correct.
Changing the clock setting
1 Press [MENU/SET] to display the menu
and then press 2.
2 Press 4 to select the [SETUP] menu
icon [ ] and then press 1.
3 Press 3 4 to select [CLOCK SET] and
then press 1. Set as shown previously.
When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately
3 months even if the batteries are
removed.
You can set the year from 2000 to 2099.
The 24-hour system is used.
If the date is not set in the camera it will
not be printed when you use a photo
printing service, even if the store provides
a date printing option for your
photographs. (P73)
OFF
ON
PLEASE SET THE CLOCK
CLOCK SET
MENU
M/D/Y
JAN
11 2006
..
00 00
:
CLOCK SET
SELECT SET EXIT
MENU
SETUP
1
/
3
BATTERY TYPE
EXIT
MENU
SELECT
MONITOR
AUTO REVIEW
0
n
1SEC.
2MIN.
CLOCK SET
POWER SAVE
VQT0U87ENG.book 19 ページ 2005年12月27日 火曜日 午後7時12分