Panasonic PV-GS300 Camcorder User Manual


 
Before using
25
LSQT0974
ª Operating with remote control
The menu screen transition is the same as when
the buttons on the main unit are used.
1 Press the [MENU] button.
2 Select a menu item.
Use the direction buttons (3, 2, 1, 4) and
[ENTER] button in place of the joystick on the
main unit.
3 Press the [MENU] button to exit the menu
screen.
Adjusting LCD monitor/viewfinder
ª Adjusting the brightness and color
level
1 Set [SETUP] >> [LCD SET] or [EVF SET] >>
[YES].
2 Move the joystick up or down in order to
select the item to be adjusted.
[LCD SET]
: Brightness of the LCD monitor
: Color level of the LCD monitor
[EVF SET]
:Brightness of the viewfinder
3 Move the joystick left or right to move the
bar indication representing the brightness.
4 Press the [MENU] button or the joystick to
complete the settings.
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
To adjust the brightness of the viewfinder, close
the LCD monitor and extend the viewfinder to
activate it.
These settings will not affect the images actually
recorded.
ª
In order to increase the brightness of
the entire LCD monitor
1
Press the [POWER LCD] button.
The [ ] indication appears on the LCD
monitor.
If the [POWER LCD] button is pressed, the
entire LCD monitor will become approx. twice
as bright as the normal.
When the [POWER LCD] button is pressed
again, the [ ] indication disappears and the
original brightness is restored.
This will not affect the images to be recorded.
If you turn on the Camcorder when the AC
adaptor is used, the [POWER LCD] function will
automatically be activated.
You cannot use this function in PC Connection
Mode.
EVF
POWER
LCD
LSQT0974_ENG.book 25 ページ 2005年11月7日 月曜日 午前11時58分