Panasonic PV-GS300 Camcorder User Manual


 
Playback mode
43
LSQT0974
Playback mode
Playing back tape
Set to Tape Playback Mode.
(An operation icon automatically appears on
the LCD monitor.)
1 Operate with joystick.
1/;: Playback/Pause
6: Rewind/Review playback (Reverts to
playback with the 1/; icon.)
5: Fast forward/Cue playback (Reverts to
playback with the 1/; icon.)
:Stop
The power will not turn off when the LCD
monitor and the viewfinder are closed and
retracted during Tape/Card playback mode.
During cue/review playback, fast-moving
images may show noise as a mosaic.
Before and after cue/review playback, the
screen may become blue for a moment or
images may be disturbed.
ª
To adjust volume
Adjust the speaker volume for playback.
1 Move the [s /VOLr] lever to adjust the
volume.
Towards [r]: increases the volume
Towards [`]: decreases the volume
(Nearer the bar to [r], larger the volume.)
On the remote control, press the [T] button to
increase the volume or the [W] button to
decrease it.
When the adjustment is completed, the volume
indication will disappear.
If you do not hear the sound, check the settings
of [SETUP] >> [12bit AUDIO].
ª
Repeat playback
When the tape end is reached, the tape will be
rewound and played back again.
1 Set [ADVANCED] >> [REPEAT PLAY] >>
[ON].
The [ ] indication appears. (In order to
cancel the repeat playback mode, set
[REPEAT PLAY] >> [OFF] or turn off the
power.)
When you set [USB FUNCTION] >>
[WEB CAM] and then connect the USB
connection cable, the repeat playback mode is
canceled.
ª
Settings on the audio
If you cannot listen to the desired audio when
playing back a tape, check the settings in
[SETUP] >> [12bit AUDIO].
When you record and dub the audio in [12bit]
and set [SETUP] >> [12bit AUDIO] >> [MIX], the
audio will be played back in stereo sound
regardless of the settings in [AUDIO OUT].
PC
VOL
LSQT0974_ENG.book 43 ページ 2005年11月7日 月曜日 午前11時58分