Panasonic PV-GS300 Camcorder User Manual


 
With a PC
53
LSQT0974
MotionDV STUDIO -56-:
Using the MotionDV STUDIO software allows
you to capture video recorded on a tape or
images viewed through the lens of a
Camcorder. Connecting the Camcorder with
the DV cable also allows you to output
images edited on the personal computer to
the tape in the Camcorder.
4 Follow the instructions on the computer
screen until the installation is complete.
Setup window will disappear when the
installation is complete.
Note:
If a window does not appear automatically, click
the “start” Button on your desktop and then click
“Run”. When the “Run” Box is open, type in
“D:\InstMenu.exe” and click “OK”. (“D” is used
when the CD-ROM drive is drive D.)
Connecting Computer and
Camcorder
Before making these connections, turn off all
devices, which are to be connected.
It is recommended that you use the AC Adaptor
as the power supply of the Camcorder.
ª
Using Built-in SD Drive
By connecting the Camcorder and personal
computer with the USB cable, you can transfer
still images saved on a Memory Card directly to
your personal computer.
ª
Operating environment
Despite having the operating environment
indicated, it may not be possible to use the
program with some types of personal
computers.
For Windows
OS:
IBM
®
PC/AT compatible personal computer with
pre-installed;
Microsoft Windows 2000 Professional
Microsoft Windows XP Home Edition/Professional
CPU:
Intel Pentium II 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
Interface:
USB 1.1 or later — A type
The USB equipment operates with the driver
installed as standard in OS.
For Macintosh
OS:
Mac OS X v 10.3 to X v 10.4
CPU:
PowerPC G3 (400 MB or more), G4, G5
RAM:
64 MB or more
The USB equipment operates with the driver
installed as standard in OS.
1 Insert the Memory Card into the Camcorder.
2 Set the Camcorder to PC Connection Mode.
3 Connect the Camcorder to your personal
computer with the USB cable.
4 Camcorder power is turned on.
5 Open [My Computer] and click
[Removable Disk] (For Windows 2000
users).
Click [Open folder to view files using
Windows Explorer] and then [OK] (For
Windows XP users).
6 Double-click a file you want to view.
You can view images stored on the Memory
Card and also save them to your hard disk.
Do not change file or folder names on the
personal computer. The images on the
Memory Card may not be viewable on the
Camcorder.
Appropriate driver to recognize Camcorder is
automatically installed by Windows Plug and
Play when connected for the first time.
After the USB connection cable is connected to
the Camcorder, open [My Computer] or
[Windows Explorer] to check that the drive is
displayed as a removable disk drive (only when
card is inserted into the Camcorder). It enables
you to operate it in the same way as a floppy
disk drive, and you can use the same drag and
drop or copy methods.
PC
LSQT0974_ENG.book 53 ページ 2005年11月7日 月曜日 午前11時58分