Filter
Top Products
Record mode
26
LSQT1181
Recording on a tape
Remove the lens cap. (
-12-
)
(When the Camcorder is turned on with the
lens cap attached, the automatic white
balance adjustment may not function
properly. Please turn the Camcorder on after
removing the lens cap.)
When this unit is purchased, the aspect ratio is
set to [16:9] for recording images compatible with
a wide-screen TV. To make this unit compatible
with regular TVs (4:3), change the [ASPECT]
setting before recording the images (
-33-) or
change the [TV ASPECT] setting when watching
them on the connected TV (
-39-).
≥
Set to Tape Recording Mode.
1
Press the recording start/stop button to
start recording.
2
Press the recording start/stop button again
to pause recording.
≥For the recording time on a tape, refer to -14-.
≥Carry out a recording check (
-27-) to verify that
the image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search (
-27-) .
ª
On-screen display in the tape
recording mode
1) Recording time elapse
2) Remaining tape indication
3) Still picture size
4) Card indication (
-57-)
5) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
6) Quality of still pictures
ª
Concerning the remaining tape time
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
≥During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
PC
;
1)
2)
3)¢
5)¢
6)¢
0.2
4)¢
S5650.book 26 ページ ２００６年１２月５日 火曜日 午前１０時５２分