Filter
Top Products
39
Special Features
Picture in Picture Wipe Title
Captured still images (page 35) can be
recorded along with the current picture.
Before you begin...
• Connect Camcorder to power source.
• Insert the Memory Card (optional, page 34).
• Set POWER to CAMERA.
1 Press MENU for MENU
mode. Press
UP or
DOWN to select
DIGITAL EFFECTS .
2 Press M.FOCUS for
DIGITAL EFFECTS
menu.
Press
UP or DOWN to
select
DIGITAL WIPE .
3 Press M.FOCUS to select ON.
Press
MENU twice to exit.
• A still image captured on the Memory
Card and the Multi image playback
page number is displayed on the right
side of the screen.
• If there are no recordings on the card,
“NO PICTURE” appears on-screen.
4 Press or to select still image to
be used.
5 Start recording (page 17).
• When recording starts, Multi image
playback number disappears. Then
the captured still images can be
recorded along with the current picture.
• To exit from the Picture in Picture Wipe
title mode, press
(MODE) (page 40).
Moving
Picture
Still
image
Note:
• If Memory Card is not inserted, “NO CARD”
appears on-screen. Set Power to OFF, then
insert the Memory Card.
• Pictures captured with other brand products
cannot be used with this Camcorder.
• If “INCOMPATIBLE IMAGE” appears on-
screen, the size of the captured image
cannot be played back on this Camcorder.
• If “CARD ERROR” appears on-screen, see
page 56.
• If Picture in Picture Wipe Title is selected,
the following functions are not available:
MotionSensor, Auto Fade, Digital Fade,
Color Digital Filter, Digital Zoom, Digital
E.I.S., Still/Strobe/Wide.
• In Picture in Picture mode, UP/DOWN will
not control focus in Manual Focus mode.
( P - P = Picture in Picture )
Multi image playback
page number
Digital Still Camera
1, 2, 3, 4
MODE
5