77
VQT1E14
With other products
8 Select the paper size setting
on [PAPER SIZE].
≥ You cannot set paper sizes not
supported on the printer.
9 Select the layout setting on
[PAGE LAYOUT].
≥ You cannot set page layouts not
supported on the printer.
10Select [PRINT] # [YES] and
then press the cursor button
in the centre.
The pictures are printed.
≥ Exit PictBridge by disconnecting
the USB cable after the pictures
have been printed.
When you want to stop printing
halfway
Press the cursor button down.
A confirmation message appears. If
[YES] is selected, the number of prints
set is cancelled and the screen returns to
step 4. If [NO] is selected, all the settings
are kept and the screen returns to
step 4.
≥ Avoid the following operations during
printing. These operations disable
proper printing.
jDisconnecting the USB cable
jOpening the card/battery door
jSwitching the mode dial
jTurning off the power
≥ Check the settings for the paper size,
quality of print, etc. on the printer.
≥ You may not be able to print still
pictures recorded with other products.
≥ When the unit is connected directly to
the printer, the DPOF settings cannot
be used.
≥ Connect the printer directly to this unit.
Do not use a USB hub.
[STANDARD]: Size specific to the
printer
[4t5 INCH]: L size
[5t7 INCH]: 2L size
[4t6 INCH]: Postcard size
[A4]: A4 size
[STANDARD]: Layout specific to the
printer
[]: No frame print
[]: Frame print
VQT1E14(EB_GC_ENG).book 77 ページ 2007年2月28日 水曜日 午後2時23分