Panasonic SDR-S10 Camcorder User Manual


 
94
VQT1E14
Others
[DISPLAY]
The screen indications are selected as
shown in the illustration below.
[POWER SAVE]
[OFF]:
The power saving function is not
activated.
[5 MINUTES]:
When about 5 minutes have passed
without any operation, this unit
automatically turns off to prevent the
battery from running down. When you
use this unit, turn it on again.
In the following cases, the unit may not
turn off even when you set this to
[5 MINUTES].
jWhen using the AC adaptor
jWhen connecting the unit to a
computer or printer via the USB
cable
[BEEP SOUND]
This allows operations such as starting
and ending recording to be signaled by a
beep.
When [OFF] is set, no beep is heard
when an operation such as recording is
started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognised by the
computer or the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not
starting. Check the sentence displayed
on the screen. (l 98)
[INITIAL SET]
When there is a menu that cannot be
selected due another function or mode
being activated, set to [YES] for
changing the menu settings back to the
initial shipping condition.
(The language setting cannot be
changed back to the initial shipping
condition.)
Menus related to
[SETUP]
[OFF] [ON]
[OFF]
[ON]
[OFF] [5 MINUTES]
;
;
0h00m00s
R 1h30m
SP
[OFF] [ON]
[YES] [NO]
VQT1E14(EB_GC_ENG).book 94 ページ 2007年2月28日 水曜日 午後2時23分