Filter
Top Products
86
VQT1E14
With a computer
3 Connect this unit and a
computer.
A USB cable (supplied)
≥ Insert the plugs as far as they will
go. The unit and computer will not
operate properly if the plugs are
not inserted fully.
≥ Do not use any other USB
connection cables except the
supplied one.
(Operation is not guaranteed with
any other USB cables.)
4 Press the cursor button up or
down to select
[PC CONNECT], then press
the cursor button in the
centre.
5 The [SD Browser auto start]
screen appears.
≥ If [Yes] is clicked, MotionSD
STUDIO starts. (l 89)
≥ Click [No] if you do not want to
start MotionSD STUDIO.
≥ When the unit is connected to a
computer, its power cannot be
turned off.
In this case, disconnect the USB cable
(l 90).
≥ When a computer is accessing the
card in this unit, the card access lamp
lights. ( appears on the LCD
monitor.) Do not disconnect the USB
cable or AC adaptor while the card is
being accessed as it may damage the
data.
≥ It may be necessary to reboot the
computer after connecting this unit to it
for the first time.
A
VQT1E14(EB_GC_ENG).book 86 ページ ２００７年２月２８日 水曜日 午後２時２３分