Filter
Top Products
Others
105
VQT1D97
This unit cannot be
operated though it
is turned on.
This unit does not
operate normally.
≥ The unit cannot be operated unless you open the LCD
monitor.
≥ Remove the SD card then press the RESET button.
(
l 109) If normal conditions are not restored yet,
remove the battery or AC adaptor, wait about 1 minute
and then reconnect the battery or AC adaptor. Then
about 1 minute later, turn on the power again.
(Conducting the above operation when the access
lamp is on may destroy the data on the card.)
The screen has
changed suddenly.
≥ Has the demonstration started?
# If you set [DEMO MODE] to [ON] without inserting a
card in video recording mode or picture recording
mode, the unit is automatically set to the demonstration
mode for introducing its functions. Normally this should
be set to [OFF]. Press the MENU button, then select
[SETUP] # [DEMO MODE] # [OFF] and press the
cursor button in the center.
A function
indication such as
the remaining time
indication or the
elapsed time
indication is not
shown.
≥ If you set [SETUP]>[DISPLAY]>[OFF], indications
other than warnings and date indications disappear.
Problem Check points
VQT1D97(ENG).book 105 ページ ２００７年３月２０日 火曜日 午後５時３３分